China Factory Quick Curing Fiberglass Pipe Repair Wrap Tape for Water Pipeline Repair

• Customization: Available
• Color: White Black
• Heat Resistance: High Temperature
• Waterproof: Waterproof
• Application: Plastic, Metal, Wood
• Adhesive: Polyurethane
• Base Material: Fabric Base
• Type: Double Sided Tape
• Shelf Life: 2 Years
• Working Time: 3-5minutes
• Sample: for Free
• Price of Terms: Fob & EXW & CIF & CFR
• Shipment: by Sea, by Air, by Express
• Max.Service Temperature .: 150 Celsius
• Working/Usable Life: 3-5 Min
• Pressure Resistance: up to 8 MPa( with Putty)
• Curing Time: Cures in 10-30 Minutes
• Transport Package: Durable Carton and Pallets
• Specification: 2/3/4/5/6inch
• Trademark: Ansen
• Origin: Xian, China
• HS Code: 7019900000

Product Description

Product Description

Ansen pipe repair tape is a fiber reinforced polyurethane repair tape designed for the rapidly repair of cracks and leaks in most types of pipework encountered in the engineering,chemical,marine and other industries.

Ansen pipe repair tape works on wet,dry,dirty or corroded pipes even works under water,Salt or fresh activated by water it cures to produce a tough chemical resistant wrap around pipe.

Easy to use  No mixing,repaired pipes can be returned to service in less than thirty minutes.

Resistant to most chemicals  including: mek, acetone,sulphuric acid,ethylalcohol,gasoline,toluene,diesel,varsol,crude oil,hydraulic oil...

Product  Advantages

1.No need to consider base material ,it can be used for all types of pipes,even most plastic types.
2.Water activated,no need to mix with activator to start curing.
3.Don't produce any heat during curing.
4.No sparks.
5. Easy to use and carry.
6.Odorless, non-toxic, non-flammable, durable.
7.Resistance to mechanical wear and tear , corrosion resistance, water resistance,high insulation. 

Technical Data

√ Withstand temperature up to 120-150°C

√ Repairs leak in 30 minutes

√ Withstand pressure up to 3.1 Mpa/31bar/450psi

√ Tensile Strength: 5075Psi

√ Hardness : 70 Shore D

√ Pipe diameter up to 60″ (1524 mm)

√ Ideal for pipe reinforcement & corrosion protection

Product parameters

Operation  Process  

1.Shut off the pressure and isolate leak. Clean, degrease and abrade substrate around leak site.

2.Work putty until a uniform mixture is evident.3.Apply mixed putty immediately to leak site. Firmly press putty into defect.

3.Put on gloves supplied with the Pipe Repair Bandage. Immerse Bandage in water or place under running tap water for 10 secs.

4.Wrap the Bandage tautly around the leak site extending 50mm either side of damaged area.

5.Smooth the resin as it foams during curing and work resin into the base fabric in a 'tightening motion'. Restore pipe to service once Bandage is cured.

Application  

Pipe Repairs

Abrasion Protection

Many industries

Offline Repairs • Active Leaks • Sealing Joints • Hazardous Material Spill Control • Reinforce Thinning Walls • Corrosion Control & Protection.

Structural Reinforcement;

Repairs in Hard to Reach Areas;
Underwater Repairs;
Electrical conduit/ cable repairs;

Oil & Gas; Petrochemical; Offshore; Chemical; Marine; Power Generation; Building & Facilities Management; Water Distribution; Wastewater; Manufacturing Plants; Industrial Processing; Electronics; Pharmaceutical; Pulp & Paper; Irrigation; Food Processing.

Company Profile

Ansen Medical Technology Development Co., Ltd.

Ansen Medical Technology Development Co., Ltd. is established in 2003, as a highly focused manufacturer and exporter of orthopedic casting tape, splint, electric plaster saw, casting padding, tubular bandage, elastic Bandage etc. We collect all the materials, machines and technology from best suppliers worldwide, and hunt person with high qualified skills and experiences.      

   

Based on these conditions, we can provide the best products and services to our clients, lead this industry in domestic market for more than 21 years. Backed by our good reputation and rich experience, we have established a stable sales network with several global customers from Europe, America, and Asia etc.

FAQ

Q1 :How long has your company been established?
Our group was founded in 2003 and established the Ansen factory for 21 years.

Q2 :Can l get some samples for testing before placing order?
Yes, we can provide you with some samples for testing according to your needs

Q3 :Can l use my own logo or design on the product?
Yes, we can customize the product size and packaging according to your requirements.

Q4 : Do you have a factory?
Yes, we have a factory in Xi'an, Shaanxi. We warmly welcome you to visit our company and factory. We are a very professional company.

Q5 :What's the lead time?
As usual, we will complete the delivery within 15 days after your order be placed.