Industrial Armor Tape Leak Pipe Repair Bandage Exhaust Bandage Wrap

• Material: Fiberglass Fix Tape
• Colors: Various Color Fiberglass Fix Tape
• Product Name: Exhaust Bandage Wrap
• OEM: Available
• Sample: Free
• MOQ: 500
• Model NO.: PR005
• Transport Package: 3layers, 1st Plastic Bag, 2ND Paper Box, 3rd Corru
• Specification: 10cm Fiberglass Fix Tape
• Trademark: Ansen Fiber Glass Fix Tape
• Origin: China Fiber Glass Fix Tape
• HS Code: 3005901000
• Production Capacity: 20000 Bags Per Month

Product Description

Industrial Armor Tape Leak Pipe Repair Bandage Exhaust bandage wrap

* 19 years profesional manufacture Armor-wrap Fiberglass Pipe Repair Bandage 
* FDA CE Certfication
* OEM your size and backing 
* Various Colors for Choose
* 7-15 Working Days for Delivery
* Free Samples Offered for Test

Description: 

Pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water activated polyurethane resin.
Our pipe repair bandage uses environmental friendly materials, and mainly used for Repair Oil , Gas & Water Pipeline etc,and adheres to Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, ect.

Level 1:

Level 2 (High strength):

 

Name	Model	Size	Packing
Pipe Repair Bandage	PR002	50mm    x  3.6m (2" x 12´)	10rolls x 10rolls/ctn
	PR003	75mm    x  3.6m (3" x 12´)	10rolls x 10rolls/ctn
	PR004	100mm  x  3.6m (4" x 12´)	10rolls x 10rolls/ctn
	PR005	125mm  x  3.6m (5" x 12´)	10rolls x 10rolls/ctn
	PR006	150mm  x  3.6m (6" x 12´)	10rolls x 10rolls/ctn

 

Outstanding Advantages	Technical Data
v  Catalyst: Water  v  Resin Makeup: Polyurethane  v  Heat Resistance: 180°C  v  Pressure: 450 PSI  v  Bonds: Copper pipe, PVC, polypipe, metal, fibreglass  v  Set Time: 20 - 30 minutes, sets under water  v  Chemical resistance: Most diluted chemicals and fuels	♦ Useable life: …2-3 minutes, depending on temperature of water and pipework ♦ Intial cure time: … 5 minutes ♦ Full cure time: … 30minutes ♦ Shore D hardness: … 70 ♦ Tensile strength: … 30-35Mpa ♦ Tensile modulus: … 7.5Gpa ♦ Maximum service temperature: … 150°C ♦ Pressure resistance: … 450psi (Min wrapping 12 layers around cracked/leaking area)

 
 Fast Pipe Repairing Armor Wrap Tape Cable Connection Repair Bandage

Industry	Area of use		Reason for use
Steel Smelter Works	Processing: blast furnaces, water,  steam, waste product pipes		Emergency repairs until shutdown
Steel Sheet & Coil  Manufaturing	Processing: Steam and water pipes		Emergency repairs to burst pipes
Petroleum	Oil, gas, water supply lines		Emergency repairs to fuel,  oil and gas lines during 24hr shift
Coal, Copper & Zinc Smelter	Processing: blast furnaces, water, steam,  sludge, slurry lines		Emergency repairs
Sugar Mills	Corrosive fluid lines, abrasive product pipes,  general low pressure, water and steam lines		Emergency repairs to corrosive, water,  steam and abrasive lines
Aluminiume	Processing Plant: boiler rooms, sludge, slurry,  water, steam pipes		Emergency repairs to sludge  and chemical lines
Power Stations	Ash transfer systems, pulverized fuel tubes,  cooling water lines		Emergency repairs to transfer  systems and lines
Timber Mills	Processing of wood paneling,  ply and softwood		Emergency repairs to chemical  and water lines
Paper Manufacturing	Pulp Mill		Emergency repairs to chemical,  water and waste lines
Motor Vehicle  Manufacturing	Production manufacturing plant		Emergency repairs to leaking water  and steam pipe

 

Application:
 
1. Once the leaking area is identified, shut down relevant pipes or hoses immediately. 
2. Prepare the surface by cleaning and roughening the pipe.
3. Put on enclosed latex gloves. 
4. Apply Steel Putty to the leak site and mould. 
5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds.    
  The entire contents must be used once the package is opened. 
6. Apply around the damaged area extending up to 50mm either side of the leak to ensure complete coverage.    

 It is important that the bandage is applied.
7. quickly as curing begins once it is taken out of the water.  
8. Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together. 
 Continue this action during and upon completion. 
 
For best results, manufacturers recommend the completed application should be no less than 10mm in  thickness. Please refer to the instructions for use on each bandage for a troubleshooting guide.

 

Package:OEM service is available

Shipping:within 15 working days after payment