Armored Cast Bandage Durable Water Activated Electrical Fiberglass Armor Tape

Product Description

Armored Cast Bandage Durable Water Activated Electrical Fiberglass Armor Tape

Product Description

4560-5" (100 mm x 1.52 m)
4560-10"(100 mm x 3.04 m)
4560-15"(100 mm x 4.57 m)
Armorcast Structural Material Sheath Repair Armor Wrap Tape Cable Protection Structural Strengthening Material Armor Bandage

Armorcast Structural Material is packed (rolls) dry in a sealed foil envelope and is a flexible fiberglass knit fabric strip that has been saturated with a curable black urethane resin syrup that starts to cure when water is added. Once wet, the fiber strip becomes tacky and sticks to itself, so it wraps easily around almost any shape or size.

Armorcast Structural Material is resistant to moisture, fungus, acid, alkali, ozone, sunlight, gasoline and high temperatures.

It combines long life and very little maintenance. 

Armorcast Structural Material Sheath Repair Armor Wrap Tape Cable Protection Structural Strengthening Material Armor Bandage

Product Details

Features                                                                            Benefits
* Simple to apply, no special tools required                                                * Eliminates the cost of tools and searching for electricity, just add water

* Ansen Armorcast Tape can be used for cable jacket repair                   * Versatility of using one product for various network types                       
  and strengthening the old cable and splices                                              
                                                                                                                             * Very little maintenance; low cost of ownership
* Ansen Armorcast Tape is resistant to moisture, fungus, acid,                                    
  alkali, ozone, sunlight, gasoline and high temperatures                          * Less expensive option than replacing an entire closure and less time 
                                                                                                                                 needed in the field to install product
* Water activated, no mixing required
                                                                                                                              *Sets rock hard in minutes
* Sets rock hard in minutes. Only 30 minutes required for                     
  a complete cure                                                                                               *Conforms to irregular shapes and maintains the rigidity and shape

* Light weight. The fiberglass construction of the tape allows 

  for excellent mechanical protection without extra weight stress
  on the cables

Storage: Store in a cool, dry area away from direct sunlight.
Shelf life: 2 years from the date of manufacture, which is located on the exterior packaging.

Application

* Wearing gloves to protect your hands from the resin.

* Open the pouch and immerse the Ansen armorcast in fresh water for 4-6 seconds to activate. The entire contents must be used once the 
    package is opened.
   Option: You can also apply directly without first dipping in water. The curing time is longer if it is not dipped in water.

* Apply the Ansen armorcast around the damaged area, extending up to 50mm on either side of the cable to ensure complete coverage.
   The armorcast tape must be applied quickly as curing starts once it is taken out of the water.

* While wrapping, pull each layer tightly and firmly using your hands to mold and squeeze the layers together in a tightening motion.

* Continue to smooth the surface until the Ansen armorcast has fully set. 

* Let it cure and dry. Cables can be moved in 30 minutes.

APPLICATION TIPS & HINTS

* Please wear protective gloves when operating.
* While wrapping, pull each layer tightly and firmly.
* For best results, smooth and rub the surface to achieve good contact between layers.
* Please do not open the bag before you use it.
* Clean the damaged area thoroughly, removing any foreign bodies


 

Armorcast Structural Material Sheath Repair Armor Wrap Tape Cable Protection Structural Strengthening Material Armor Bandage

Size Introduction

Product Name	Product Number	Product Description	Product Size
Armourcast tape Armour Cast Tape Armor bandage Armor Wrap Structural Strengthening Material Armorcast Sheath Repair Material Armorcast Structural Material	4560-5	Armorcast Structural Material (Bulk, 5')	100 mm x 1.52 m
	4560-10	Armorcast Structural Material (Bulk, 10')	100 mm x 3.04 m
	4560-15	Armorcast Structural Material (Bulk, 15')	100 mm x 4.57 m
We can also provide gloves if you need.

Package

ANSEN Armorcast Structural Material is packed (rolls) dry in a sealed foil envelope

We can OEM the packaging in 2 ways:

1. Print your brand on the package

2. Make your brand on the label and stick to the package.

Armorcast Structural Material Sheath Repair Armor Wrap Tape Cable Protection Structural Strengthening Material Armor Bandage

Company Profile

Ansen is a factory and devoted to armor cast since 2003. The machine equipments are imported from Germany. Now we
are doing business with more than 20 countries and regions, such as Europe, the United States, South Africa, Asia and Middle East.

Exhibition

Contact us

Eileen
 

(Sales Manager)
 


I have been working at ANSEN for over 9 years, servicing customers over 20 countries.
 

FAQ                                                                                                           
1. Are you a manufacturer or trading company?
Reply: Yes. Ansen is a leading manufacturer since 2003. Welcome to visit our factory.

2. What`s your MOQ?
Reply: We`d like to support your business start with a small order. Whether 50pcs or 100pcs is workable for us. So please contact us feel free.

3. How about the lead time?
Reply: Our lead time is flexible. We can negotiate to take priority of your order if it is urgently needed. Generally,10-15
business days, the exact manufacture date depends on order quantity and production schedule.

4. How will you guarantee the quality?
Reply: We can provide free samples to you for quality testing.
Our samples are production samples, no need to worry about the quality is different from mass production.

5. How can we get the free samples?
Reply: There are 4 options for you to choose. Please contact Eileen about it.

6. How to ship the goods?
Reply: By courier is the best choice for samples. It`s the fastest way.
For a few cartons, you can choose by air or by sea. If you need it urgently, by air is your first choice, meanwhile, the cost is higher than by sea.
By sea is the most economical way to ship mass products.

We can quote you the shipping cost for you to compare.

7. Can you use our brand logo on the package?
Reply: Yes, of course. 2 options for you to choose.
a. Make your logo on labels, and put the labels on the package.
b. Printing your logo on the package directly. Please contact Eileen for more information.

8. What price of terms you can do?
Reply: FOB, CIF, CFR, EXW all of these are ok with us.

9. Who are you?
Reply: I am Eileen, and I have been working at ANSEN for over 7 years, servicing customers over 20 countries.
I will take care of your order and provide you the best solution.

Armorcast,Armor Cast Tape,Fiberglass Armor Wrap Tape,Armored Cast Wrap Tape,Armor Cast Wrap,pipe repair bandage